I designed my own christmas decoration in the shape of this tree look a like.You can put a light source inside it (make sure it's not hot) or use it as a vase.The height is 110mm.

I printed a tree with 3.2mm thick walls scaled down to a 37.5% size, which results in a 1.2mm wall.I also printed a tree with 3.2mm thick walls scaled down to a 25% size, which results in a 0.8mm wall.

You can experiment with different sizes (wall thickness). The 100% scale version has a wall thickness of 3.2mm.I also added files with a wall thickness of 0.4mm, but it's probably more difficult to print. I used an extrusion width of 0.40mm.

Usage of any models from 3DParts4U will be at your own risk!

My PLA Simplify3D print settings:

• 3600mm/minute (60mm/second)
• hotend 185°C | bed 50°C
• 250 micron | infill 15%
• 2 top layers | 2 bottom layers | 2 outline layers
• brass nozzle 0.35mm
• extrusion width 0.40mm
• retraction 1.00mm
• extrusion multiplier 1.00
• coasting 0.30mm
• wipe distance 5.00mm
• fan 100%
• no support needed