Elevate your interior design with this stylish twisted vase. Featuring a smooth spiral geometry that catches the light beautifully, this model bridges the gap between modern art and functional decor. The design transitions from a rounded base to a soft-square opening, creating a dynamic and organic look.

Perfect for dried flowers, decorative branches, or simply as a standalone centerpiece on your shelf or desk.

Design Features:Modern Aesthetic: Minimalist lines suitable for Scandinavian, Modern, or Contemporary interiors.

Vase Mode Ready: Designed specifically to be printed as a continuous spiral (Vase Mode / Spiralize Outer Contour) for a fast and clean print without seams (Z-seam).

No Supports: The geometry is self-supporting, ensuring a hassle-free printing experience.

3D printing settings Printing Recommendations:This model is easy to print on any FDM 3D printer.

File Format: STL

Mode: Vase Mode (Spiralize Outer Contour) is highly recommended.

Material: PLA, PETG, or Silk PLA.

Pro Tip: Use Matte PLA (white or grey) to achieve the look of a ceramic or plaster vase, as shown in the render.

Pro Tip: Use Silk/Rainbow PLA for a stunning, shiny effect that highlights the curves.

Nozzle: 0.4mm (standard) or 0.6mm/0.8mm for a thicker, sturdier wall.

Layer Height: 0.16mm – 0.24mm (0.2mm is ideal).

Bottom Layers: 3-5 solid bottom layers for stability.

Supports: None required.

Brim: Not usually needed, but use a small brim if you have adhesion issues.

Watertight Instructions: If you intend to use this for fresh flowers with real water:

Print with a slightly higher flow rate (105-110%).

Increase printing temperature by 5-10°C to ensure better layer bonding.

Alternatively, coat the inside with a clear epoxy resin or waterproof varnish.