I designed this endless filament spool holder in FreeCAD! It consists of three different parts: a rod, connector and a stand.By connecting them to each other, you can create a very long spool holder!
Usage of any models from 3DParts4U will be at your own risk!
My PLA Simplify3D print settings:
- 3600mm/minute (60mm/second)
- hotend 185°C | bed 50°C
- 250 micron | infill 15%
- 3 top layers | 3 bottom layers | 3 outline layers
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 75%
- only support needed when printing the connectors
