Elven Bridge Statue II - High Res 3D Print ready Free 3D print model

3D model of a Elven bridge statue from the pc video game The Witcher 3: Wild Hunt, its expansion Blood and Wine.

For download available:

• the original 3d model, exported unedited from the official The Witcher 3 REDkit modding tools
• optimized version by me in various file formats, the optimizations include the following: removed lower poly count LOD 3D models, scaled the model to its actual in-game size, reset scale to 1, set rotation to be front facing

Notes for 3d printing from my testing, see uploaded images:

• optimize your 3d print for a more beautiful look, slow down the print speed, use smaller layer height
• the print must use supports due to overhangs
• use more walls, I used three instead of the standard two in my slicer application Creality Print, the 3d model has been printed on a Creality K1C
• my print was stable enough with a less percentage Gyroid infill, use concentric printing pattern
• I recommend to print the model in one session without multiple parts, as max height use your printing space
• use a good filament
• dont print this model to small, otherwise parts will not get printed proberly as you can see on my images, use 0.1mm layers and slow print time and be very careful to remove the supports around the eagle, otherwise it will break off and needs to be glued back onto the model

The original and slightly optimized 3D model has also been uploaded here: https://www.cgtrader.com/free-3d-models/character/fantasy-character/elven-bridge-statue-ii-the-witcher-3-blood-and-wine

This is an unofficial fan work and is not approved/endorsed by CD PROJEKT RED.

Like what I'm doing? Consider a donation and check out my other work:https://allmylinks.com/ju5ti