Screw on Bottle Resin Funnel with Filter Free 3D model

Three part project. The picture above is the 60mm version, but the STL is the 110mm rim version.
This can be found in detail on Autodesk viewer: https://autode.sk/3239mSd

1. Screw Cap, made to screw on top of an Elegoo Resin bottle. Has 2 air holes to allow air to escape as resin goes in, without resin to come out the air holes.
2. Filter, sits inside the cap between the funnel and the cap.
3. Funnel, this is a 110mm / 4.3in rim.