3D Printed Kitchen Accessories Challenge

3D Printed Kitchen Accessories Challenge

Ladies and gentlemen, it’s time to get practical with 3D printed kitchen accessories challenge. If it can be 3D printed and used in the kitchen, it is welcome in the challenge.

The contest will run from the 23rd of March, 2016, to the 23rd of May, 2016. Only entries submitted during this time count. You can upload as many entries as you want, and anyone who uploads 5 - yes, five - or more is eligible for portfolio contest.

There will be 3 winners - a first place winner and two runner-ups - in the model category, and a first place winner plus a runner-up in portfolio.

We're teaming up with the innovative filament makers at Formfutura for this competition - all winners will get various and freshly made filament spools from Formutura, as well as some swag from CGTrader. First place winners will get 2 spools of awesome new translucent HDglass Filament, one spool of EasyWood Filament (looks and smells like wood, because it is 40% wood) and a spool of CarbonFil (HD glass reinforced with long carbon fibers) Filament. The runner-ups will get one spool of EasyWood and HDglass filament each.

Participation
Challenge ended on: 2016-05-23 23:59:59 UTC

Entries

Below are the top quality models that were participating in this challenge.

There are no entries in this challenge just yet.

Awards & Prizes

There are two categories of awards in this challenge. Both best model will have one winner and two runner-up's and best portfolio category will have one winner and one runner-up.

Best 3D Printed Kitchen Accessory Model

For the 1st place winner
  • 2 Spools of 1.85 mm or 2.85 mm (Chosen By the Winner) of HDglass Filament by Formfutura
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of EasyWood Filament by Formfutura
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of CarbonFil Filament by Formfutura
  • 3 free sales by CGTrader
For the 1st runner-up
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of EasyWood Filament by Formfutura
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of HDglass Filament by Formfutura
  • 1 free sale by CGTrader
For the 2nd runner-up
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of EasyWood Filament by Formfutura
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of HDglass Filament by Formfutura
  • 1 free sale by CGTrader

Best 3D Best 3D Printed Kitchen Accessory Portfolio

For the 1st place winner
  • 2 Spools of 1.85 mm or 2.85 mm (Chosen By the Winner) of HDglass Filament by Formfutura
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of EasyWood Filament by Formfutura
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of CarbonFil Filament by Formfutura
  • 3 free sales by CGTrader
For the 1st runner-up
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of EasyWood Filament by Formfutura
  • 1 Spool of 1.85 mm or 2.85 mm (Chosen By the Winner) of HDglass Filament by Formfutura
  • 1 free sale by CGTrader

Terms & Conditions

In order to qualify for the prize winnings, you must agree to terms & conditions.

Things you must know
  • 3D Printed Kitchen Accessories Challenge will run from the 23rd of March, 2016, to the 23rd of May, 2016.
  • Only Models uploaded during the challenge time are considered as entries in the competition.
  • When uploading your entry be sure to check "kitchen-challenge" to get your model tagged and counted to the challenge.
  • Cool renderings are optional but we will definitely consider this when judging.
Things you should know
  • Designs uploaded to the gallery are not treated as valid entries.
  • Upon joining this challenge, you agree that your rendering scene might be used by sponsors for marketing (non commercial!) purposes.
  • You can have as much entry models as you want. By uploading more than 5 entry models you are eligible to enter Portfolio category too.
  • The challenge is open to everyone, including teams, legal entities and people from all over the world.
  • Participating in the challenge and uploading 3D Printing models to CGTrader platform is free of charge.
  • All the entries must be original and not derivable.
  • Employees and relatives of CGTrader and sponsor teams are not allowed to participate in this challenge.
  • Any existing taxes or duties must be paid by the winner. CGTrader is not responsible for any illegal actions taken by the prize winners.
  • We are independent sheriffs of this challenge, so stick to the rules and don't do anything stupid.
  • Got some questions? Have suggestions? Check for FAQ or drop us a line at info@cgtrader.com.

Partners

Below is the information about sponsors and the products that are giveaways for the challenge.

3D Printed Kitchen Accessories Challenge Partners

Formfutura

Formfutura offers a wide variety of ABS, PLA and “Specialty” filaments. All ABS, PLA and Specialty filaments are extruded with the latest technologies available, ensuring very tight tolerances with respect to the filament’s diameter and roundness.


Judging

The judging of the challenge is supervised by CGTrader staff. Winners will be chosen following the requirements below:

Best 3D Printed Kitchen Accessories Model

  • Quality of the 3D Printed Kitchen Accessories challenge model
  • Uniqueness, innovation, and general achievement in design of 3D Printed Kitchen Accessories Challenge model
  • Clear and attractive presentation on CGTrader.com

Best 3D Printed Kitchen Accessories Portfolio

  • Quality of the 3D Printed Kitchen Accessories challenge portfolio
  • Uniqueness, innovation, and general achievement in design of the 3D Printed Kitchen Accessories Challenge portfolio
  • Clear and attractive presentation on CGTrader.com

Frequently Asked Questions

Please go through these questions before contacting us

Do I need to upload files or only images of my 3D design?

You need to upload files and images of your 3D design in order to participate in the challenge.


I don't want to put my entry model for sale. Do you have any suggestions?

Does earning money from your digital files sounds like a bad idea? Just try to put higher price on it, let's say 300 USD.


I don't want to lose copyrights on my model after it is sold.

There are General, Editorial and Custom licenses for you to choose under which you want to operate. Individuals or companies which bought your model can't use it for commercial purposes if it hasn't been changed. So no worries - you won't lose the copyright.


How can I participate in the challenge?

Design a unique 3D Printable model for 3D Printed Kitchen Accessories Challenge and upload it to CGTrader.


What if I put the required tag on my already published 3D model on CGTrader - do you treat it as a valid entry?

No. Only 3D models uploaded in the period from the 23rd of March, 2016, to the 23rd of May, 2016 will be treated as valid entries.


Do free 3D Print models participate in the challenge?

Yes, absolutely. Sharing artwork is always appreciated in the community.


Can I enter with 3D Print models which participated in other challenges elsewhere?

Yes. There are no restrictions on publishing and selling your models elsewhere.


Do price tags play any importance when entries are being judged?

No. But do not forget that the prices are always judged by the customers.


I want to participate in the challenge so I am going to delete my already uploaded models and upload them again to meet the "publishing period" requirement. Can I do that?

No. We are tracking every deleted and uploaded model, so it is useless to drive-through our requirements of the challenge.

Help