Cable Mega Set 40 STL Cable Clips Wire HoldersZipTie 3D print model

OverviewA comprehensive cable-management pack with 40 print-ready parts: snap ring clips, base clips (screw or zip-tie), cable combs, under-desk hooks and raceway clips. Clean, manifold geometry and flat bases for support-free printing.

What’s inside

40 × STL (millimeters)

Ring clips: Ø6–20 mm, widths 10/14

Base clips: channels 6/8/10/12/14 mm (screw & zip-tie variants)

Cable combs: 5 / 7 / 9 slots, pitch 8 / 10

Under-desk hooks: S / M / L

Raceway clips: 10×6, 10×8, 12×6, 12×8, 14×6

Recommended print settingsLayer 0.20 mm, nozzle 0.4 mm, walls ≥0.8–1.2 mm, infill 15–25%. Orient flat; most parts print support-free.

Scale & unitsReal-world mm. Watertight/manifold meshes.

LicenseRoyalty-Free for using the included STL files in your builds. Do not redistribute/sell the files as-is.

SupportQuick replies and small adjustments upon request.

Types: ring clips (Ø6–20 mm, width 10/14), base clips (channel 6–14 mm; screw/zip variants), combs (5/7/9 slots; pitch 8/10), under-desk hooks (3 sizes), raceway clips (10/12/14 × 6/8)

Print notes in README

Recommended print settingsLayer 0.20 mm, nozzle 0.4 mm, walls ≥ 0.8–1.2 mm, infill 15–25%. Orient flat; no supports needed in most cases.

Scale & unitsReal-world mm. Watertight/manifold.

LicenseRoyalty-Free for the printed parts and for using the included STL files in your builds. Do not redistribute/sell the source files as-is.

SupportI provide quick replies and small adjustments upon request.