Adapter Anycubic Wash Cure Machine and Elegoo Mars Build-Plate 3D print model

3D model of the Adapter/Connector between 3D printers Elegoo Mars build-plate and Anycubic Wash & Cure Machine.

• This is the Digital File for 3D printing!In the photos, you can see how this Adapter may look like and how it can be used.

A well-known problem is that it is impossible to connect the Anycubic Wash & Cure Machine Brackets and Building Platform from the Elegoo Mars 3D printers.I offer you my solution to this problem.My adapter is very convenient to use with standard and adjustable brackets Anycubic Wash&Cure Machine.I have carefully designed and tested this part for maximum compatibility and usability.

Please watch the video where I show the functionality of this product:https://www.youtube.com/watch?v=1-q7DT_7NXU

Suitable for all series of 3D printers Elegoo Mars (Original Mars, Mars Pro, Mars 3)

On Note

I developed this adapter for the first version of Anycubic Wash & Cure Machine, so it was not tested on their newer versions.Please see the photos and video, and make sure that the bracket from your Wash & Cure Machine looks the same.

SUPPORTS FOR 3D PRINTING MODELS

Please note that I do not offer pre-supported 3D models!!!

There is a wide variety of 3D printing technologies and materials available for now.I can give some recommendations on the 3D printing technology I use. But I do not make/sell 3D models with supports ...it simply does not make sense, because what is good for one technology is completely unsuitable for another.

So, when purchasing this 3D model, it is assumed that you have experience in 3D printing and know what to do.

• If you do not have the ability to 3D print this model, please check out my Monaco Felice Etsy Shop, where you can find the real-made product ...or contact me directly.

Recommended Basic Settings for FDM Printers:

Nozzle - 0,4 mmLayer Height - 0,2 mmTemperature - 210 C (or you can adjust what you prefer)Wall Line Count - 3Infill - 30% TrianglesSupports - basic settings ...just place the 3D model with the rear part on the platformBuild Plate Adhesion - Raft

Control dimensions of the 3D Model: 45x69.3x50.7 mm.

LICENSE

You can use this 3D model of Adapter to 3D print the physical item in any way you like, and use it for your own needs, but you can not sell them.Also, you can not resale or share my digital files, in the original or any modified form!Please respect my work.