A fully functional C-clamp designed for 3D printing — no metal hardware required, just print, assemble, and use.

The model includes:

• Main C-frame body
• Threaded screw with handle
• Swivel pressure pad

Print settings recommendations:

• Material: PLA, PETG or ASA recommended
• Layer height: 0.2mm
• Infill: 40%+ for the frame, 60%+ for the screw
• No supports needed for the frame; screw may require supports depending on orientation

Assembly is simple — thread the screw into the frame and snap the pressure pad into place. Watch the assembly video for reference: https://www.youtube.com/shorts/aUEicqNQ108

Great as a functional tool, a demonstration piece for 3D-printed mechanisms, or a fun printable gadget.