I've used the Empire's crest from Warhammer to make this headset stand. It's wall mounted with 2 screws. The crest is glued onto the other part. Easy peasy, Sigmar squeezy.

For the crest:• Size: +- 139 mm x 143 mm• Layer height: 0.30 mm• Infill: 15% grid• Support: no• Print time: 3h40m

For the wall mount:• Size: +- 100 mm x 130 mm• Layer height: 0,30 mm• Infill: 15% gyroid• Support: no• Print time: 7-8 hoursTip: I used 3 perimeter layers for extra strength