Title:

Abstract Divided Tray Collection STL – Organic Compartment Organizers for 3D Printing

E-mail for collaboration: koznov.sergey@gmail.com

Organize small everyday items with this Abstract Divided Tray Collection, a selection of functional and decorative STL models for 3D printing.

The previews show circular and organically shaped trays with three- and four-compartment arrangements. Each design combines a continuous outer rim with recessed pockets, using curved boundaries and differently sized sections to create a sculptural tabletop organizer.

The divided layouts provide separate spaces for jewelry, stationery, craft supplies, and other small accessories. Rounded interior transitions and flowing outlines give the collection a softer appearance than conventional rectangular sorting trays.

Print the trays in matching colors for a coordinated arrangement, or choose a different shade for each design. White, cream, and earthy tones emphasize the organic forms, while bright colors can make individual compartments and stored items easier to distinguish.

The food shown in the render illustrates a serving-tray concept. Direct food-contact suitability has not been established for the finished prints. Use them for decoration and non-food storage unless the fabrication materials and finished surfaces have been separately validated for the intended food use.

Features:

• Varied Tray Outlines: Circular and asymmetrical organic forms offer different decorative profiles.
• Three- and Four-Compartment Layouts: The previewed designs provide several arrangements for grouping small objects.
• Recessed Storage Pockets: Individual sections keep different categories of accessories separated.
• Integrated Dividers: Raised boundaries define the compartments within each tray.
• Different Pocket Sizes: Larger and smaller sections accommodate a variety of compatible items.
• Rounded Interior Transitions: Curved corners and softened pocket edges complement the flowing exterior forms.
• Continuous Outer Rim: A defined perimeter surrounds each tray’s compartment layout.
• Low Tabletop Profile: Shallow dish-like forms suit desks, shelves, dressing tables, and craft workspaces.
• Customizable Colors: Neutral, earthy, pastel, or bright colors offer different decorative finishes.
• Scalable Models: Resize in your slicer while checking compartment dimensions, divider thickness, and the material beneath each pocket.

Included Files:

• .STL: Abstract divided tray models with circular and organic outlines and multiple recessed compartments.

Recommended 3D Print Settings (FDM):

• Print Orientation: Start with the broad underside on the build plate and the compartments facing upward.
• Layer Height: 0.16–0.20 mm as a starting point for balancing curved surface detail and printing time.
• Perimeters / Walls: 3 walls initially, adjusted for the chosen scale and divider thickness.
• Infill: 15–25% as a starting point, using Gyroid or Grid.
• Top / Bottom Layers: Begin with 4–6 layers and inspect coverage beneath the compartment floors.
• Supports: Evaluate each model’s outer curves and underside. Requirements depend on the actual overhangs and orientation.
• Material: PLA or Matte PLA for decorative indoor use and non-food storage. PETG is another option with suitable settings.
• Brim: Optional if the broad footprint needs additional bed adhesion.
• Build Plate Fit: Check the complete tray outline before printing at your chosen scale.
• Compartment Fit: Compare pocket dimensions and depths with the objects you intend to store.
• Scale Check: Confirm that the dividers, rims, and pocket floors remain sufficiently thick after resizing.
• Finishing: Remove stringing and printing residue, then smooth contact edges as needed.

These settings are suggested starting points, not verified print specifications or confirmation of food-contact suitability.

Multi-Purpose Use:

• Jewelry organizer for rings, earrings, and small accessories
• Desk tray for paper clips, coins, and stationery
• Craft organizer for beads, buttons, and small components
• Dressing-table accessory sorter
• Decorative tabletop dish collection
• Design prototype for divided servingware

Note: This is a digital STL model collection for 3D printing. No physical items are included. Food, utensils, glasses, textiles, tags, and other accessories shown in the images are not included. Final print quality, compartment capacity, and durability depend on the selected scale, material, printer, and settings. Direct food use requires separate validation of the finished part.

Tags:

divided tray, compartment tray, abstract tray, organic tray, tray collection, decorative dish, divided dish, jewelry organizer, jewelry tray, desk organizer, stationery tray, accessory organizer, craft organizer, bead sorting tray, snack tray concept, organic design, modern decor, 3d printable, 3d printing, stl