1/11
Knife sharpening syste, for standard wet stones - different angles
Files:
Knife sharpening made easier. All you need is 8mm metal rod, suitable bearings and M3 bolts. You can glue your wetstones, stones, diamond stones or even sandpaper onto the tool and start sharpening very easy. You can adjust 3 different angles by changing the bearings or simply print the wetstone holder in 6 diffrent sizes, so the angle changes slightly from stone to stone. All 6 sizes are included in the download! Turn the knife easily and always have it in same place and same angle like on the other side. After rotation it has secure place holder for your knife again for sharpening.
Remember that some parts need support material to print. Some parts have to be rubber material for full functionality. After printing you need a wooden underground to screw the part onto.
If you have any questions sent a comment or write me privately. I love to hear from you about anything and will answer as soon as possible :)
(Privatverkauf, keine Rücknahme, keine Garantie.)
