Genshin Impact teleport waypoint decoration. It is designed for 3d printing and it is highly detailed

--Dimensions—

It has 13cm x 10cm x 10 cm sizes bur you can rescale it what sizes you want.

--Assembling—

Just one of the files needs assembling. Paste the 2 pieces each other, done :)

--Recommended Printing Options—

I suggest minimum 3 walls and 20% or more infill rate. The lower layer heights will bring more detailed prints because it is a tiny and highly detailed figurine. I personally prefer 0.12m layer height on my FDM printerThere is 2 option. First one includes one piece file. It is a whole one piece model and doesn't need any support while printing but if you don't trust your printer, you can use some custom supports like i did in the introduction video. Also you can use partial infill rates for different parts of the model. For the first point where teleport starts from base, i used 100% infill and used 50% infil for the second thin part at the top. The rest of the model has 20% infill. That was my slicing options. Second one is seperated as bottom platform and teleport itself. Files includes both.

If you have any questions or requests, feel free to message me. I'll gladly help as much as i can.

don't forget to follow me on instagram! you could reach me on DM and follow my productions as well@random_but_qualityhttps://www.instagram.com/random_but_quality