This wheel is a 100 percent hassle free 3D printable toy. No plastic support material is required to print it. If you have a printer which has problems with bed adhesion you may have to use a basic raft but in most cases this is not needed as the tire and wheel are perfectly flat on the bottom layer and most printers even a 101 Hero can easily print this model.

The wheel has been 3D printed and fully tested to make sure the part is strong and works well on every printer. It should not require any glue for assembly but if your printer has issues in maintaining size accuracy you may have to add some to secure the inner part if you print it in 2 parts.

You have the option of printing the model as one part and then painting it or you can print it in two parts, then paint them separately and then assemble them later. The assembly process is easy and works even if you use PLA. Of course should you use ABS watch out for possible shrinking of the inner wheel as it is designed to be perfect for PLA only.

The mesh is very low poly so it will be super easy and fast to make any scaling, rotating or other editing to it although not of that should be required as the STL file is already positioned correctly for your easy printing experience.

Also the scale of the wheel is exactly measured to fit your 1 24 scale RC car.The PLA configuration is perfect for drift car wheels however if you want to make it rubbery you will need to use ABS or coat the exterior of the wheel with grip type material.