This is a detailed model of the Polish firefighting boat Strazak 3 that was based in the city Gdansk. This complete model is divided in 6 groups: B for Back Cabin, 60 parts,S for Steering Cabin, 19 parts, T for Tower, 17 parts,H for Hull, 62 parts,M for Main Cabin, 26 parts,BS for Boat Stand, 5 parts.8 sheets of drawings with assembly and building instructions are added in both PDF and JPG format.Sheet 1 : Main AssySheet 2 : TowerSheet 3 : Steering CabinSheet 4 : Main CabinSheet 5 : Back CabinSheet 6 : Hull and DeckSheet 7: HullSheet 8 : Boat StandThe model is intended to print with a resin printer on a scale 1:50. The model will be approximately 626 mm long. Because of the size of the model and the number of parts it is intended for skilled modelers.I printed the model with a Creality LD002H with Siraya Tech fast grey. The most problems I had was with printing parts of the hull because I oriented them wrong by entrapping air. Making a small hole with the printing software will solve that problem. Also, when printing long or thin parts do not leave them to long in water or alcohol. The model will absorb the liquid and curl afterwards. Quick rinse and dry before curing evenly and spray with paint to stop further cure. Do not cure to long because it will make the model brittle. I have painted the model with acrylic paint with a normal brush and a spray brush.