This kit contains the wheel and tire for the Airfix Bentley 4 1/2 litre, to improve the accuracy of your build with a smaller thickness spoked wheel and the correct tires and also the right wheel nuts, It come with the spinner lock nut for both sides, drilled ones for the back and one for the spare tire (5 lock nuts in total, right side rear drilled, right side closed front, left side rear drilled, left side front closed, spare center lock). There is a file for the tire and the wheel and one file with both together. There is also another option of wheel, with thinner, but wider spokes.This can be a tricky print.If you like my designs, you can tip me and credit me with the design.If you like to sell the prints of my designs just buy them here and credit me with the design, no need to ask or pay commisions.I can do commision designs, just ask me what you need and I'll see what I can do.

Do not support the spokes.I suggest you to print it with the tire, because fitting the tire after may break the spokes. If you print the tire apart, scale it up 1~2%, depending on your printer accuracy more tests needs to be done to fit the tire.I do not recommend this file for the 1/24 scale, if you need, I can make a file with bigger spokes to the 1/24 version, just ask me (no charges).If you need any help, don't hesitate on contacting me.Some sanding, drilling or other procedures may be needed.