Hi, This is 1970 racing camaro rc body shell from Mike Eddy it's for 3d printing. You can use this for RC or other option

just let me know for what scale you want

*Here is available *

Print ready file (STL) and Obj, Mb file For any other format plaese let me know.

For any help please inform me.

3D printing settings

For FDM Printers (PLA / ABS / PETG):

Layer Height: 0.1 – 0.2 mm (for fine surface detail)

Infill: 15–25% (higher for stronger RC shells)

Wall/Perimeter Thickness: 2–3 lines (0.8 – 1.2 mm)

Supports: Only where necessary (mainly under bumpers & wheel arches)

Bed Adhesion: Brim or Raft recommended for long flat parts (like chassis or roof)

Print Speed: 40–60 mm/s (for best detail and surface quality)

For SLA / Resin Printers:

Layer Height: 0.03 – 0.05 mm (ultra-fine detail)

Supports: Light to medium density (especially under overhangs like bumpers & mirrors)

Curing: Post-cure with UV light for strength

Thank you