Flying Saucer to 3d print!/!\Update 13/08/2020/!\ (easier to 3dprint/assemble)

UfoPartTop (with or without holes on top) :117.3 x 117.3 x 19.4mm

UfoPartDown :117.3 x 117.3 x 14.1mm

BlackPart(Windows).STL (insert iner of UfoPartTop before glue them) :38.9 x 38.9 x 5mm

GuidesX3.STL (to assemble)

My Cura setting:

• Layer : 0.2mm
• Nozzle : 207°
• Bed : 70°
• Infill : 15%
• Support : Yes all (not for windows part)

Total time to print (approximately) = 8h32