The green martian is a warrior on the fictional planet of Barsoom (based on Mars), created by Edgar Rice Burroughs and first featured in the 1917 novel A Princess of Mars.In the books, Green Martians are around 15 feet tall (4,5m), with tusks protruding from their mouths, green skin, and with double torso, each with its own set of arms.They are warlike and cruel.

The model consist of 13 parts saved in stl files in recommended positions.

The scale of model is 1/16 with 27cm (270mm) height.

Test print on FDM printer with PLA filament and slic3r software.

Test printing settings

• Layer height : 0.15 mm
• Perimeters : 2
• Horizontal Shells -> solid layers top : 5 , bottom : 3
• Fill Destiny : 20%
• Fill Patern : Line
• Skirt -> distance from object 2 , height :1 , Brim width : 1mm
• Generate support : enable
• Overhang threshold : 45 angle
• Raft Layers : 2 ( the object will be raised by this number of layers )(except rock base)
• Patter spacing: 2 mm
• Interface layers: 1 layers
• Interface pattern spacing: 0.2 mm
• Speed For printing moves -> Small and external perimeteres 20 mm/sec
• Extrusion Width -> Default , First layer , perimeters , external perimeters : 0.42mm