Stuntwoman Dynamic Action Pose

High-detail 3D-printable miniature of a stuntwoman captured in a dynamic action pose. Ideal for tabletop gaming, dioramas, and display models. The sculpt emphasizes motion and costume detail while remaining optimized for hobby printing. What you get - Single STL file of the posed figure (no scenic base included). Printing notes - Best printed in resin for finest detail; layer heights of 0.025–0.06 mm recommended. FDM users will achieve good results at 0.1–0.2 mm with a 0.4 mm nozzle. - Model may require supports under the chin, forearms, inner legs, and any overhangs; orient upright or slightly leaning forward to minimize supports. - Hollowing and drain holes are not included — if printing large, consider hollowing to save resin and add drain holes. Uses - Tabletop gaming and wargaming - Dioramas and scale scenes - Painting practice and display Notes - This is a digital file for 3D printing. No physical item will be shipped. Assembly, priming, and painting are required after printing

Base scale 1:87 (HO). The STL is dimensioned at 1:87 — scale it up or down in your slicer to print at any scale you need.

We use ai to paint our models for display. All other renderings and original model are done in 3dsMax 2025 and represent close to 10 years of 3d model work.

All Stls are done to a target size of 50 to 100mb to make them manageable for the average users computer. This results in a a mesh density of 33 faces per mm