Intended Use

This model is intended for personal use and physical printing. Commercial use resale or redistribution of the digital files is not permitted unless a commercial license is purchased separately.

Runnie Ruse is a custom high detail fantasy character sculpt designed for collectors display and 3D printing. The model features a powerful confident sword wielding pose that highlights strong anatomy balanced proportions and expressive character design.

The sculpt has been carefully refined to achieve a premium collectible look with clean surfaces sharp details and professional geometry. The model is fully print ready and scaled to a standard action figure size approximately 7 inches in height, making it perfect for display figures tabletop use and collectible shelves.

This model is suitable for both resin and FDM printing and is ideal for 3D printing enthusiasts collectors fantasy character showcases and custom action figure projects.

Key Features

1. High detail fantasy girl character sculpt
2. Dynamic sword wielding pose
3. Scaled to standard action figure size
4. Clean professional print ready STL
5. Suitable for resin and FDM printing
6. Perfect for collectibles display and tabletop use

3D printing settingsThis model is provided as a clean, professional, print ready STL file and is scaled to a standard action figure size approximately 6 to 7 inches in height. The scale can be adjusted as needed without loss of detail.

Recommended Printing Method

This model is best printed using a resin 3D printer to capture fine surface details such as facial features, clothing textures, and weapon edges. FDM printing is also possible but may require a smaller layer height for better detail.

Resin Printing Settings

1. Layer height 0.03 to 0.05 mm
2. Exposure settings according to your resin manufacturer
3. Medium supports recommended especially for the sword arms and fine details
4. Hollowing optional depending on printer and resin usage
5. Drain holes recommended if hollowed

FDM Printing Settings

1. Layer height 0.12 to 0.2 mm
2. Nozzle size 0.4 mm or smaller
3. Infill 10 to 20 percent
4. Supports required for overhangs and the sword
5. Print at slow to moderate speed for best surface quality