Neoclassical Swan Armchair 2

This is a carefully scaled neoclassical highback armchair defined by its signature swan‑head arm terminals, a slightly arched tall back crowned with a carved foliate crest, and a framed seat with a shallow cushion profile. The sculptural vocabulary follows neoclassical ornament: controlled acanthus and foliate carving executed in low relief so the decorative motifs remain legible at hobby scales while avoiding fragile micro‑spikes. Key visible features - Swan arm terminals: each arm flows into a modeled swan head with an elongated beak and a gently fluted neck form. Beak and neck details are modeled in moderate relief to preserve silhouette while avoiding fragile thin tips. - Tall arched back and crest: the back has a gentle arch and a pronounced crest carrying shallow foliate carving and stylized rosettes. The crest height gives the chair a strong silhouette that reads from typical layout viewing distances. - Apron and seat framing: the apron carries low relief rosettes and leaf carving; the seat is modeled as a shallow, framed cushion so painters can imply upholstery texture without excessive geometry. - Turned leg profile: the front legs are turned and terminated with short tapered feet; the rear legs sweep back slightly to suggest a traditional carriage‑style chair stance. - Balanced ornamentation: carving depth and undercuts were intentionally limited so details photograph well, survive common hobby printing parameters, and minimize breakage during support removal. What you receive - One master STL sized for HO 1:87 (the canonical Miniature Reality master). This single file is the product included with purchase. If you need another scale, uniformly scale the master in your slicer; we do not provide additional scale‑specific STLs. Why this piece works for layouts and dioramas The tall back and pronounced swan arms create a strong focal silhouette suitable for parlors, hotel lobbies, railway station waiting rooms, and affluent domestic interiors. The shallow, precise ornamentation reads well at HO viewing distances and survives typical hobby printing and handling. Multiple copies print efficiently for repeating interior sets while a single chair functions as a showpiece in a vignette. Printing and finishing guidance (for hobbyist printers) - Master scale: file set to HO 1:87. To print at other scales, uniformly scale the model in your slicer and verify wall thicknesses and feature robustness after scaling. - Layer height and nozzle: recommended 0.10–0.20 mm layer height and a nozzle in the 0.25–0.40 mm range. Finer nozzles capture more carving detail at the cost of print time and more delicate cleanup. - Orientation and supports: orient the chair with the seat down to minimize supports on the crest and swan heads. Light supports under the crest and around the apron are typically sufficient; avoid dense supports near beak tips to simplify cleanup. For resin printing, small touchpoint supports on the undersides of the crest and arms work well; for FDM, consider a brim under the legs and minimal tree supports for the crest. - Robustness: carving depth was limited intentionally. If scaling up significantly, check for overly thin decorative filigree and adjust wall thickness or apply a small uniform offset where necessary. Finishing suggestions - Prime in a midtone base, use a thin wash to emphasize foliate carving, and drybrush raised edges to bring out crest and beak profiles. The shallow cushion accepts subtle highlighting to imply upholstery. - For simulated upholstery, paint the cushion separately with masked edges or use a thin varnish to raise the sheen only on the seat area. Use cases - Dioramas and period interiors: place beside a fireplace, under portraiture, or as a showpiece in a salon vignette. - Model railroading: suitable as an interior furnishing in HO‑scale grand hotels, station lounges, or wealthy household rooms; multiple copies print well for repeating interior sets. - Display and photography: the carved crest and swan silhouette are optimized for closeup product photography and miniature museum‑style displays. Provenance and review note This listing was finalized from legacy stub metadata labeling the piece as a neoclassical swan armchair. The automation reported low identity confidence and provided no authoritative real‑world measurements; if you require verified historical attribution or exact prototype dimensions, request a manual review prior to purchase. License and included files - Included: single HO 1:87 master STL. Miniature Reality provides this file for personal, display, and hobby use consistent with store licensing. We do not supply separate scale STLs; scale the included master in your slicer for other ratios. Support If you require measured prototype dimensions, bespoke scaling, or printer‑specific advice (printer model, nozzle size, preferred slicer), contact us before purchase and we will advise on feasibility and potential custom work

Base scale 1:87 (HO). The STL is dimensioned at 1:87 — scale it up or down in your slicer to print at any scale you need.

We use ai to paint our models for display. All other renderings and original model are done in 3dsMax 2025 and represent close to 10 years of 3d model work.

All Stls are done to a target size of 50 to 100mb to make them manageable for the average users computer. This results in a a mesh density of 33 faces per mm