A simple Krogan Soldier bust made between Blender and Rhinoceros. Blender was used to make the sculpt for the head and Rhino was used for the armor and logos.

============= Features ============

I recommend to use these parameters for the Slicer:

• Print Speed around 55 mm/s.
• 5%-10% Infill.
• 0.12 Layer Heigh or smaller,
• Supports ON (If you are using CURA, try the Tree Support Feature).
• Raft is not neccesary but you could use Skirt.
• PLA or PLA + to achieve great results.

============= Notes ============

• I made a test on an Artillery X1V4 using 215°C for the Nozzle and 60°C for the bed.
• The printed test has no logos on it.
• Don't hesitate to contact me if you have any question about this 3d model.