WARNING : These products are not for reselling - It's for a Personal use only

If you are interested in buying each one separately please see the following links

https://www.cgtrader.com/3d-print-models/art/sculptures/john-wick-statue-bust

https://www.cgtrader.com/3d-print-models/art/coins-badges/john-wicks-marker

Marker Description:

This is a 3D printed file of John Wick 's Blood Marker - John Wick 2

Divided into 5 assembled objects for a better quality control as the following :Blood_Marker_SignHinge_TubeMarker_ButtomMarker_FacadeSlogan

-It's easy to assemble , you can also see the guide on the picture description

-Files are tested and successfully printed on -Anycubic Photon M3 Pictures are available above

John Wick Statue Bust Description :

Model is tested and prepared for 3D print

I've attached several STL files to the head in case you want to achieve more Crispy looking accuracy for the head skin details as the following

Head_Dec1 670,074 polys

Head_Dec2 recommended for good machines - 1,340 Mil PolysSuit

Recommended Printing size to start from : Build plate 7.6 Inches or aboveHead - X 43.72 mm , Y 71.69 mm , Z 65.58 mm Suit - X 88.58 mm , Y 68.51 mm , Z 80 58 mm

-Also I've attached my Chitubox file settings for the Marker Not pre supported

If some one facing troubles with the print size you can follow the mentioned parameters below

Marker Facade /Locked ratio : X / 56.48 Y / 11.46 Z / 51.79

Slogan / Locked ratio : X / 78.53 Y / 11.36 Z / 78.38

Marker Bottom / Locked ratio : X / 77.51 Y / 14.96 Z / 78.09

Blood Marker Sign / Locked ratio : X / 51.46 Y / 8.88 Z / 49.44

Hinge Tube / Locked ratio : X / 1.02 Y / 1.67 Z / 9.70

If there's any problem please let me know i'll be happy to help