High detailed Godzilla x evagelion

Made in zbrush

Format STL,OBJ

The figure has 12-13 part to print (conect them tight with glue)

No support for resin 3d print

This 3d modeling base on Godzilla x evagelion from godzilla event

WARNING

This 3D printing model is so big many part of it is above 200,000KB you have to have good pc trying to convert it to G-Code

I prefer to use STL file it the proportion seem fine

exact size of each part

part 2 : x = 185.2123 y = 65.318 z = 130.1285

part 3 : x = 27.9143 y = 37.0722 z = 33.3587

part 4 : x = 46.5952 y = 42.7948 z = 67.0784

part 5 : x = 104.1085 y = 47.5702 z = 104.8701

part 6 : x = 187.1491 y = 130.7939 z = 163.127

part 7 : x = 66.6751 y = 100 z = 94.2298

part 8 : x = 91.1347 y = 184.1896 z = 193.242

part 9 : x = 209.2365 y = 80.0993 z = 164.8297

part 10 : x = 121.2484 y = 143.4499 z = 124.2117

part 11 : x = 29.0374 y = 54.5258 z = 122.7825

part 12 : x = 35.7826 y = 64.5997 z = 143.4531

part 13 : x = 219.2038 y = 275.9047 z = 111.3525

part 14 : x = 92.3103 y = 523.8605 z = 523.8589 this part is base

part 15 : x = 204.8988 y = 155.7572 z = 187.0965

part 16 : x = 92.304 y = 149.598 z = 373.1247

in millimeter unit

the first part doesn't seem to be anything of the model ,so don't print it

This 3D model is a fan-made artwork inspired by Toho. The seller does not claim any ownership of Toho intellectual property.This model is for personal use only. Commercial use, reproduction, resale, or minting as NFT is strictly prohibited.