Da Killer Ship 3D print model

Sailing the mighty high seas, this massive ship is armed with a harpoon gun, 10 cannons on each side, a string of smaller ones on the front mast, and a huge one on the main deck. It has seven gobbos, some manning the huge cannon on the deck, others climbing the netting, one large weird Orc, a harpoon gunner at the front and definitely not three gobbos in a coat steering the awesome ship (it's an Orc Helmsmen, trust me)

Watch out for the front, it's a little pinchy ;)

There are two sets of files for the captains quarters, front deck and hull of the ship. If you are using a smaller printer, these files have been sliced into more printable pieces for you, the hull in one piece is 239mm tall, 148mm wide and 123mm long so unless you have a large printer build plate, you will have to print the sliced version of it.

Everything is pre-supported professionally by Atlas3DSS

EDIT as of 2025, I have modified the decks and sails so they are inserted via a square peg, to stop spinning or wobbling of sails. The new updated decks and sails can be found in the zip file new sails and decks.