The Ranger has been heavily updated and the 3rd part of the Colossus has been added.

For information on the process and other photos, come have a look at old Ranger related posts on my Patreonhttps://www.patreon.com/MarcLeptic?tag=Rangerhttps://www.patreon.com/MarcLeptic?tag=Colossus

MarcLeptic_RangerV5_S18.stl

This is an older version, but is still valid if you want to print smaller scale. The model has some additional supports to make the model more stable when printed at smaller scales. (inside the legs, hands etc)

MarcLeptic_RangerV7_(6_parts)_Braced.stl

MarcLeptic_RangerV7_(6_parts).stl

Split to improve printabililty, and to fit on small build volume printers.

As shown in this video, you can use Lego Technic pins to attach/detach the appendiges.
Assembly: https://youtu.be/QQ-gOI5Bjgo

Ideally I will make alternate versions/poses you can exchange. Come check my Patreon for more info on that.

The _Braced version of each file is intended for FDM printers. Supports are still required.
Note: I have included the cura profiles I used for printing the ranger shown in the pictures.

MarcLeptic_ColossusV5_3_(11+ Parts).stl

The Colossus Torso is split into 16 different pieces. I have grouped them into 11 STL files [01-11] These files contain braces to improve print quality. Supports are still required.

For resin printing, I have also included alternate copies of the individual pieces without braces. Please note that I do not have a resin printer so I can't give any advice for slicing them.