scale 1 meter = 1 millimeter

Cairo tower برج القاهرة , exclusive model height 187 m

edges 57864 faces 24790

the mode is realistic , simillar to the reall tower *(there are 3 different versions of the model *) -First and the second versions(.7mm): -the models comes in 3 separated parts ( top , body , base ) -the model is hollow to reduce weight and printing material -walls thickness of 1 :3 mm in different parts-third version(cairo_tower separated) : is made for large scale printing , where the outer meshes(net) strutures are seperated formt the inner pillar strutuer ,so each can be printed alone .

The Second version/modification : made in skecth up and blender . this is a modificaion of the first version i have made before : -model is sectioned into 6 parts . -parts are joined together by interlocking of male and female portions. -the outer net -frame- has been increased in thickness . -the model is all solid , not hollowed as the first version . -no base part . -the over all scale is 2:3 time larger than the first version . note:- -there is another version of the second modification with a (.7 mm) gap between the male and female parts , you can add glow in these gaps to increase the connection between parts. Cairo Tower is a free-standing concrete tower located in Cairo, Egypt. At 187 m (614 ft), it has been the tallest structure in Egypt and North Africa for about 50 years. It was the tallest structure in Africa for 10 years, until 1971 when it was surpassed by Hillbrow Tower in South Africa.

the model is printed by Hussein EL Kaissy scale 1/200 height 72cm on the lowes resolutionhussein el kaissy channel : https://www.youtube.com/channel/UC6Tuw5QrPBhtp5j_HIIm1DQ