**A gothic-style sarcophagus **designed with classic cathedral architecture and medieval stonework.

_Perfect as a centerpiece for fantasy tabletop scenes, dark dioramas, gothic environments, or miniature crypt displays._Measuring Instructions

Before printing, check the model dimensions in your slicer.

You can scale the model depending on your intended use.

Common uses include:

• tabletop terrain
• fantasy dungeon environments
• miniature graveyard scenes
• gothic dioramas
• horror themed displays

Scaling suggestions:

• 100% – standard tabletop terrain scale
• 70–90% – smaller dungeon scenery
• 120–150% – large display prop

Always verify the proportions relative to your miniatures or terrain pieces.

Printing Instructions

Recommended materials:

• PLA
• PLA+
• PETG
• PLA-HT
• FPLA

Layer height:

• 0.16–0.20 mm recommended

Infill:

• 10–15%

Walls:

• 3–4 walls recommended

Supports:

• Usually not required

Print orientation:

Print the sarcophagus body flat on the base.The lid can be printed separately for the cleanest surface finish.

Finishing Tips

This model works extremely well with classic gothic stone painting techniques.

Suggested finishes:

• aged cathedral stone
• dark marble tomb
• weathered limestone
• ancient crypt stone
• moss-covered grave monument

Painting tips:

Prime the model

Apply dark grey base coat

Dry brush lighter stone tones

Add subtle green or brown washes for age

Seal with matte clear coat