Flower Collection: five flower and sakura ring designs from Plasmeo3D in one bundle, made for castable resin printing and lost wax (investment) casting.Included models (each in its own folder, with its preview photos):
- Flower Ring
- Flower Ring 2
- Flower Ring 3 (reference size 60)
- Sakura Light Ring (reference size 62)
- Sakura Engagement Ring (inner diameter 20 mm, bezel setting for a 1 mm round-cut stone)Value: bought separately at current prices these five rings cost €68 on (7 + 7 + 7 + 27 + 20) and $53 on CGTrader (7 + 7 + 7 + 12 + 20). The bundle is $24.Technical notes:
- Files: STL (mm) for each ring. Every STL was checked before upload: closed, watertight and 2-manifold, no holes.
- Fine filigree on Flower Ring 1 to 3 and Sakura Light: the thinnest wires are about 0.3 mm (0.4 mm on Sakura Light; about 0.7 mm minimum on Sakura Engagement). Use a high-detail castable resin and a printer that can hold that detail.
- For castable resin printing and lost wax casting in silver, gold or brass.
- Sizes: each ring is modelled at the reference size listed above. To resize, scale uniformly in your slicer or CAD to the inner diameter you need, then check wall thickness again.
- Supports go on the inner side of the band, away from the decorative surfaces.License: Personal use license.