A pair of huggie hoop earrings with a pave cross drop. Each hoop is pave set along the outer face; the cross hangs from a small link and is fully pave set on both arms, with a marquise tip at the bottom of the vertical arm. Snap-back hoop closure.

Built in Rhino / Matrix as a solid, manufacturable CAD file - not a decorative mesh. Suitable for 3D printing, casting, rendering and further CAD editing.

SPECIFICATIONS

• Overall size: 28.0 x 20.3 x 13.5 mm (pair, as modelled)
• Stones: 54 total
• 36 x Round 1.20 mm
• 16 x Round 1.30 mm
• 2 x Round 1.50 mm
• Metal parts: 200 objects, all closed solids
• Watertight: yes
• Metal weight: 14K 3.83 g | 18K 4.53 g | Silver 925 3.04 g | Platinum 5.84 g

FILES INCLUDED

• .3dm - native Rhino / Matrix file, fully editable
• .stl - metal only, stones removed, 3D print ready
• .obj - full model including stones
• .fbx - full model including stones

NOTES

• Metal weights are calculated from the true solid volume of the model, with overlapping parts counted once. Actual cast weight still varies with your caster, sprue and finishing.
• Stones are not included in the STL file, so the print is ready for setting real stones.
• Prongs are modelled slightly tall on purpose, leaving material for the setter to work with.