Simple Locker Window Door STL - Lock Set

Simple locker created to hold side windows or doors, as a quick solution.You can use the Pin I included, or use common padlocks for a greater security.There are three sizes included, this way you can create any combination based on your needs.(You can also resize it).

The size is pre-set as:All the sizes details are described on images.But basic sizes are: 30mm, 40mm and 50mm.

Please, feel free to share your printed model with me, it would be a pleasure to see the final result of your work :)

IMPORTANT: if you are a store, you can resell the physical models created from this file.You just can't resell or redistribute the STL file.

No Support required.Didn't print test, but if I did, I would this Cura settings on my Ender 3 Pro, printing in PLA:-Dynamic Quality: 0.16mm-Printing Temperature: 225-Build Plate Temperature: 70-Speed: 40 mm/s-Infil: 100% (I suggest 100% to be more resistent, but feel free).-Build Plate Adhesion Type: BrimBut feel free to change and use the settings you prefer.

The support setting will depend on your printer.With this setting you will take about an hour to print each peace, a bit more and a bit less depending on size you choose.

Yet, if you prefer more resistent piece, you can use ABS or make an iron foundry from a mold of this one.