Aesthetically pleasing modern design can be quite expensive so why not print it yourself for less? This model was designed to be as easy to print and assemble as possible with a detailed instruction booklet in PDF form, minimal supports, and properly oriented STL files. My printed lamp was sanded and painted to hide the connection lines between the parts but painting isnt necessary for this design.

Designed for a 220mmx220mmx300mm print bed

This model will use a full kilogram of fillament at 15% infill but if you would like to reduce the amount go no lower than 10%. The total print time at .2mm layer height and 15% infill is 112h 59m or about 4.7 days.

This item requires you to purchase a lamp socket and a lamp power chord if you do not have them already.

Here are the links to the parts I purchaced for this model

Power chord ($7.59): https://www.amazon.com/gp/product/B000UTE278/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1

Light socket ($2.97): https://www.amazon.com/gp/product/B000LNOISG/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

You should be able to find them at a place like Walmart if you wish to get them elsewhere