LOVA | Modern Table Lamp STL | Fuzzy Skin Ready | Commercial LicenseQUICK SUMMARY (Read Before Purchase)DIGITAL FILE: You are buying STL, 3MF, and STEP files. No physical item will be shipped.LICENSE INCLUDED: You CAN sell the physical lamps you print. No extra fees!COMPLETE KIT: 6-Piece Assembly (Base, Bottom Cover, G-Core2, Cable Vise, Lampshade, Diffuzer) + Ready-to-Print Bambu Lab Profiles.DIMENSIONS: W160mm x D160mm x H250mm.PRODUCT STORY & DESIGNMeet LOVA – a sophisticated, architectural table lamp designed to blend seamlessly into modern interiors. Featuring sharp, rounded-square geometric proportions, LOVA offers a clean minimalist silhouette during the day and transforms into a warm, atmospheric statement piece at night.The Fuzzy Skin Texture: LOVA is specifically optimized to be printed with Fuzzy Skin settings enabled on its exterior parts. This technique converts raw plastic surfaces into a premium, fabric-like or stone-like texture, giving the lamp a manufactured look while completely hiding layer lines.Intelligent 6-Piece Modular Construction: Unlike single-body prints, LOVA is engineered as a robust 6-piece kit for maximum structural integrity, easy component replacement, and clean cable routing. The internal Diffuzer softens the light source perfectly, eliminating harsh glare and hot spots.

1. TECHNICAL SPECS & PRINT RECIPE (IMPORTANT)Manual Slicing Settings (If not using provided .3mf):A) For the LOVA Lampshade:Mode: Vase Mode / Spiralize Outer Contour.Line Width: Set to 0.6mm (even when using a 0.4mm nozzle) for optimal rigidity.Bottom Layers: Minimum 10 layers for a secure mechanical connection.Texture: Enable Fuzzy Skin (Contour). Recommended settings: Point Distance: 0.25mm / Thickness: 0.1mm.B) For the LOVA Base & Internal Components:Mode: Standard Printing (NOT Vase Mode).Layer Height: 0.2mm (Initial layer: 0.2mm).Walls: 3 Walls (Perimeters).Infill: 10-15% sparse infill is sufficient.Seam Position: Aligned / Back.Hardware / Screws: The assembly holes are optimized for standard, universally available screws. The recommended screw dimensions are: Length: 15mm, Thread Diameter: 3.5mm, Head Diameter: 6mm. Alternatively, you can skip the screws entirely and use a suitable adhesive/glue to join the parts.
2. ASSEMBLY & HARDWARE SETUPModular Components & Mechanical Fastening: The kit consists of 6 precisely engineered parts that securely lock together:BASE: The main structural column featuring an internal path for electronics and integrated screw mounting tracks.BOTTOM COVER: Seals the base safely. It is securely attached to the main Base using screws.G-CORE2: The internal core component stabilizing the socket alignment. It is mounted directly into the Base using screws.CABLE VISE: Secures the power cord to prevent tension strain. It fastens directly onto the Bottom Cover with a screw.DIFFUZER: Internal sleeve that distributes light evenly across the shade.LAMPSHADE: The exterior geometric diffuse shade.Electrical & Assembly Setup:Cable Management: The base features a pre-modeled, clean cable exit path. The internal Cable Vise locks the wire in place safely on the bottom cover to prevent tension strain.Assembly Flexibility: You can use standard workshop screws (15mm length / 3.5mm diameter / 6mm head) to secure the components, or you can skip the hardware and permanently join the parts using super glue or plastic adhesive.COMMERCIAL LICENSE TERMSGoozo Studio - PERPETUAL COMMERCIAL USE LICENSE Your purchase includes a Lifetime Commercial License.YOU CAN:Print and sell unlimited physical LOVA lamps.Customize colors, filament types, and Fuzzy Skin parameters.YOU CANNOT:NO DIGITAL RESALE: You cannot resell, share, or distribute the STL, 3MF, or STEP files.NO REMIX SALES: You cannot modify the digital mesh and sell it as a new digital design.Copyright 2026 Goozo Studio. All Rights Reserved.