These clip-on stars attach to the branches of the Christmas tree in seconds. They can also be used to secure the wire of an LED garland, and you can even fit a light bulb inside the star.You can decorate your houseplants with these stars. They make an interesting imitation flower and can be attached to both the trunk and the leaves of the plant.

The model prints very quickly in VASE MODE, so it can even be made on printers with a bowden extruder.Even a beginner can print this model; no fine-tuning of retracts or flow is required. It is sufficient to select the table and extrusion temperature from the filament manual.

The model is easily scaled and can be printed in line widths from 0.4 to 1 mm. Without scaling, the model is best printed with a line width of 0.5 mm and a layer height of 0.2 mm.Be sure to switch off the bottom and lid layers, and set the print to vase mode in the slicer!

The natural and translucent colour PETG filament is excellent for printing. It is sufficiently flexible and rigid. I use ESUN filament https://aliclick.shop/r/c/1qy24uhd6faou25r?sub=cgtGlowing plastic would look even better - it will continue to glow after the general lighting is turned off, and create a unique cosiness in the dark.

To print StarClips and other 3D models, I use magnetic removable PEI UItraSSS table BIQU. Parts can be removed immediately after printing is complete, without waiting for the plate to cool.https://aliclick.shop/r/c/1qydymc6pu85w1os?sub=cgt

My printer is a reworked Creality Ender3. The main installed improvements are listed below.

Head BMG Wind V6 DD https://aliclick.shop/r/c/1qy5nnb732i4vfi6?sub=cgt

Thermal barrier steel+copper https://aliclick.shop/r/c/1qzaa3h4gtmvnr8w?sub=cgt

Brass Nozzles NF V6 https://aliclick.shop/r/c/1qy5nrcllcycjwlr?sub=cgt

3DTouch V3 Trianglelab https://aliclick.shop/r/c/1qy5oaytj302igyv?sub=cgt

Thermal cover for Ender3 https://aliclick.shop/r/c/1r0gxx99drwf7ka9?sub=cgt

Motherboard BTT SKR E3 Turbo TMC2209 https://aliclick.shop/r/c/1qy5ohg1iwpcddi6?sub=cgt