A fully detailed decorative mandir model designed for high-quality 3D printing. Features carved motifs, dome-top structure, floral centerpiece, ornamental borders and traditional script engraving. Each section is provided as a separate STL and can be resized without losing proportion. Suitable for FDM and resin printers, ideal for home decor, gifting or miniature temple setups.

Recommended Print Settings — FDM• Layer height: 0.12–0.20 mm• Nozzle: 0.4 mm (0.25–0.3 mm for extra-fine detail)• Walls: 2–3 perimeters• Top/Bottom: 6–8 layers• Infill: 10–20% (more for added weight/stability)• Print speed: 30–50 mm/s• Supports: Yes, for overhangs and ornate edges (tree supports recommended)• Bed temp: PLA 55–65 °C• Orientation: Place all flat faces directly on the bed, angle detailed surfaces to reduce visible layer lines

Recommended Print Settings — Resin• Layer height: 0.025–0.05 mm• Supports: Fine supports on hidden areas• Orientation: 15–30° tilt for best curing and minimal suction• Clean in IPA and cure under mild UV to retain fine detail

Resizing Notes• Scale uniformly to keep proportions• Avoid scaling below 60% on FDM for tiny detailing• Resin printing can handle down to 40% scale• Ensure minimum 1.5–2 mm thickness remains after scaling• Add alignment pins if assembling larger prints

Finishing Suggestions• Light sanding after support removal• Apply primer before painting• Use metallic accents for a premium look