Gastly Low Poly Vapor Decoration 3D print model

This model is designed to be used as a decoration. You can connect it to a small smoke machine or use it as a vape accessory or any other smoke-producing item. It is made to fit the IKEA Ledberg LED Spotlight but will fit most LED Puck Lights up to 60mm in diameter.

It can be connected via a PVC tube. You can use a 12mm or 10mm outer diameter tube, just print the corresponding file.

If you like this model you might also like our Low Poly Pokemon Collection: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/pokemon/ Or our 2 Gastly evoluitons Haunter: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/haunter-halloween-candy-delivery/ Gengar: https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/pokemon-gengar-halloween-low-poly-light-decoration/

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed. All cut parts are placed on the print bed as we would print them to save you time.

SIZE At 100% scale the model is made to fit either a 12mm or 10mm outer diameter PVC tube. You can scale it to use a different size tube if you like. Width 180 mm Length 80 mm Height 170 mm

3D PRINTING SETTINGS This model does not need printing supports. The only parts that I did switch them on for were the eyes. Definitely don’t print the transparent parts with supports as it would be almost impossible to get them out and the gaps will bridge easily without them.

The filaments were used are Fillamentum: Crystal Clear Amethyst Purple - back and the flat gas ring Traffic Black - front Traffic White - eyes Crystal Clear- stand

I recommend these settings for most of the parts: Layer height 0.2 mm Infill 10% 10mm brim

You can glue the parts together but I would just glue the eyes because it’s good to be able to disassemble the other parts for cleaning purposes.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/