Tangle Weave Vase Holder 3D Printable 3D print model

This is a Tangle Weave Vase 130mm, Ready for 3D Printing. You can resize as you need in Slicers.

Recommended Printing Details

• 2 walls, 10% Grid (or Cross Hatch) Infill, 0.1 - 0.2 Layer Height (Depending on the quality you want).

• Adaptive Layer Height recommended (But will slow print down)

• Tested down to 80% of its original size on a well-calibrated printer.

• Make sure you have good adhesion. Slow down the initial layer & infill speed.

• Minimal supports needed, already set up in the 3MF file