Commercial License: **You can print and sell this model, sharing or selling digital files is prohibited.You can also purchase the 3d printed model on **Amazon.in: https://www.amazon.in/dp/B0F3X29YNJVideo link: available soon3D printing settings:You can print the model in multi colour in any printer using pause function. The holes on the corners can be used to hang the model with a rope/chain (or) you can screw the model directly to the wall (or) you can use a two-way plaster.Nozzle : 0.4mm,Layer height: 0.2Line width: 0.5mmSlicer software: Creality print,Printer: FDM / RESIN,Filaments: PLA, PETG, e.t.c / resinInfill: 5 % linesRetraction: 1mm retraction speed 40Nozzle Temp: 230 bed 70 for PLA (no glue stick/adhesive needed)Supports: supports not necessary.Build plate adhesion: none, if required for your bed use brim 5mm,Thank you,Have a healthy day,Regards,Sigma Designers.