1/6
A rigid wall-mounted toilet roll holder with a flat phone shelf and an open-ended spindle. The integrated arm supports one side of the roll; the 20 mm end collar helps retain it while allowing roll replacement without a separate axle.
Installed envelope: 160 mm wide x 100 mm deep x 150 mm high. Shelf: 160 x 100 x 6 mm. Two 4.5 mm mounting holes are 110 mm apart. Intended roll limits are 110 mm width, 120 mm diameter and at least 25 mm core diameter. The STL is oriented with its backplate on the bed: 160 x 150 x 100 mm. Supports are required under the spindle and retaining collar. Suggested settings: PETG, 0.2 mm layers, 5 perimeters and 30% infill. No physical print or load test has been performed.
The package contains one STL, one STEP, the parameterized CadQuery build.py source, listing metadata, print notes and build/verification reports. Dimensions are in millimetres. Screws, wall anchors, roll, phone and rendered images are not included. Choose appropriate wall fixings; no load rating is provided.
REVIEWS & COMMENTS
accuracy, and usability.
Two Screw Toilet Roll Holder with Phone Shelf 3D print model
- Yours forever — royalty-free license
- All 5 file formats included
- Instant download after purchase
