I wanted to create something for my current tootbrush so I will not have to keep it on the washbasin, however I wanted it to be portable if I later switch between brands or want to hang other decor stuff intead. Also it can be easily cleaned if I can just grab and take it off the wall. Since I do not trust any double sided adhesive I designed it to be screw secured. I used 3.5x35mm countersunk screw with 5x31 dowel, so a 5mm hole will be sufficient. I designed it in Blender.The stl contains a two slot wall mount as well as a three slot one, a screw cover puck, left and right brush head holder which fits the side of both charger holder and cup, charger holder and a toothpaste/manual (not electric) brush holder cup. Be aware and if you want to drink from the cup, make it using food-grade material!I made it using transparent ABS as it was already loaded on my printer. Turned out pretty designerish with the gyroid infill (15%).Dimensions [mm]:Three slot wall mount: 216 x 9.1x10Two slot wall mount: 131 x 9.1 x 10charger holder: 54.2 x 79.4 x 10cup: 64.5 x 78.3 x 73Other accessories are fitting in between.