Customizable wall mounted storing system for the bathroom with different modules.

Description

This bathroom organizing system consists of an adaptable mounting bar and 5 different modules that are easy to install, can be relocated as required, and removed without leaving any residue. The mounting bar can be glued to the wall surface to keep your tiles undamaged for a renter-friendly solution. You can also screw in the bar strips the classic way if you prefer with wall screws and plugs.

• Wall
• Anchor Size(Approx): 6 x 30mm/0.24x 1.2(D*L)
• Screws Size: 4 x 33mm/0.16x 1.3(D*L)

To configure your storage system you first need to decide on a mounting bar length that suits your needs and space. You can make the bar as long as you want, starting at 50cm and in increments of 24cm. The bar consist of at lest two parts ( A and B ) designed to fit in an standard 3D printer bed diagonally. You can extend the bar with the C part in between the A and B parts.

You can equip the system with as many modular accessories as you like by clicking them onto the wall bar. Whether it's shelves, trays, hooks, or baskets: you can assemble the modules in uncountable ways.

Disclaimer: I don't own a printer so I couldn't test the printing setting or adjust the tolerances between the parts, so I leave it up to the community to discuss the preferable settings.