DESCRIPTION

Make cupcake bath bombs with a pleated wrapper, swirls of frosting, sprinkles and a cherry on top. This is a 3-part press mold you print at home: a bottom base, a tube and a top stamp that presses the pattern into the mix. Fill, press, lift.

Finished bath bomb

  • 64 x 92 x 38 mm (2.5 x 3.6 x 1.5 in)
  • 151 cm³ of mix, the same as a 2.6 in round bath bomb
  • Raised pattern 1.2 mm tall with rounded edges
  • Flat bottom, so it sits level

What's included

  • Bottom base, tube and top stamp as STL, OBJ, 3MF, PLY, GLB, DAE and X3D files, in millimetres
  • Already oriented to print flat, with no supports needed
  • Every part fits in a 4 in (102 mm) cube
  • 0.35 mm sliding clearance per side between the tube and the parts that slide into it

Part sizes

  • Bottom base: 71 x 99 x 8 mm
  • Tube: 70 x 98 x 59 mm
  • Top stamp: 63 x 91 x 23 mm

How to use

  1. Set the tube on the base. The plug fits up inside the tube.
  2. Fill the tube with mix. There's extra room above the finished thickness for loose mix.
  3. Press the stamp in firmly and evenly until its top is 6 mm above the tube rim.
  4. Lift the stamp off, then lift the tube straight up. The bath bomb stays on the base, pattern up.

Tips

  • Pack the mix a little over the top of the tube before pressing.
  • A light dusting of cornstarch on the stamp face helps the pattern release cleanly.
  • Leave the bath bomb on the base to dry before moving it.

Print settings

  • PLA or PETG
  • 0.2 mm layers (0.12 to 0.16 mm gives a smoother stamp face)
  • 3 walls, 15 to 20% infill, no supports
  • If your printer runs tight, lightly sand the edges of the plug and stamp so they slide

Notes

  • The stamp face looks mirrored. That's correct for a stamp.
  • The tube only fits one way up. If it won't slide onto the base, flip it over.

FAQ

  • Can I scale it? Print at 100%. Scaling changes the 0.35 mm sliding clearance, so the parts may bind or rattle.
  • What mix works? Any standard bath bomb mix that holds its shape when you squeeze a handful.
  • What printer do I need? Any FDM or resin printer with a build area of at least 100 x 100 mm.
  • How do I clean it? Rinse in lukewarm water and let it dry. Avoid hot water with PLA.

LicenseFor personal use. You're welcome to sell the bath bombs you make with this mold. Please don't share or resell the files or printed molds.

REVIEWS & COMMENTS

See what other buyers think about this model - real feedback on quality,
accuracy, and usability.
There are no reviews or comments yet. Please be the first one to write it.
NEW
Recently added to CGTrader - explore one of the latest models on the marketplace.

Cupcake Bath Bomb Press Mold 3D print model

Royalty Free License
One-time purchaseRoyalty-free
$3.99
  • Yours forever — royalty-free license
  • All 7 file formats included
  • Instant download after purchase
Like this model to show appreciation to the designer.
See how many times this model was viewed.
Share this model to support the designer and boost their visibility.
File formats
STL
Stereolithography | 3 files<br />File Size: 7.2 MB
OBJ
OBJ | 3 files<br />File Size: 4.88 MB
3MF
3D Manufacturing File | 3 files<br />File Size: 1.46 MB
PLY
Ply | 3 files<br />File Size: 2.74 MB
GLTF
glTF | 3 files<br />File Size: 2.6 MB
OTHER
Other | 3 files<br />File Size: 4.45 MB
DAE
Collada | 3 files<br />File Size: 4.45 MB
Provided by designer
Information and details shared directly by the model's designer.
3D printing
Indicates whether the designer marked this model as suitable for 3D printing.
Model is prepared for 3D printing
The designer indicates this model is prepared for physical 3D printing and includes printable file formats.
Pre-supported or supports are not needed
Split into parts
Dimensions (L x W x H)
Units
Publish date
Model ID
Chat