1/9
Six practical, everyday parts designed for FDM printing. All are watertight (manifold), modeled in millimeters, and print without supports in the orientation given below.
Included parts (size in mm):
- Wall Hook, 54 x 20 x 70: 2 countersunk holes for 4 mm wood screws
- Cable Clip with 3 slots, 56 x 14 x 11.7: snap-in slots designed for 5-6.5 mm cables, flat base for double-sided tape
- Under-desk Headphone Hanger, 55 x 25 x 55: 2 countersunk holes, screws up into the desk
- Phone Stand, 90 x 70 x 72.5: 65 deg back rest, charging-cable slot, fits phones up to 12 mm thick
- Shelf Bracket 120 mm, 120 x 25 x 120: diagonal brace, 4 countersunk holes placed for screwdriver access
- Drawer Pull 96 mm, 110 x 12 x 30: 96 mm hole spacing (standard), 3.4 mm pilot holes for M4 screws
Recommended starting settings: PLA or PETG, 0.2 mm layers, 4 walls, 30-40% infill (100% for the shelf bracket under heavy loads). Lay the hook, hanger, bracket, stand and drawer pull on their side so the profile sits flat on the bed. That keeps layer lines along the load path and needs no supports. Print the cable clip on its flat base.
Files: STL (one file per part, millimeters, centered), OBJ, Blender 5.2 (.blend).
Images: the part renders are plain Blender renders. The in-use photo (second image) is an AI-generated illustration of the printed parts in use.
REVIEWS & COMMENTS
accuracy, and usability.
Functional Print Pack Hook Cable Clip Phone Stand Shelf Bracket 3D print model
- Yours forever — royalty-free license
- All 3 file formats included
- Instant download after purchase
