What you getA cosplay headband set consisting of a flexible base band and a matched pair of stylized curved horns that glue or screw into the band’s locating holes for secure wear. The horns feature organic grooves for easy dry‑brushing and paint effects, while the band profile is tuned for light weight and gentle clamping force.​

Key featuresSupport‑free prints: horns and band are oriented to print flat with minimal contact area; small alignment pegs ensure correct angle.​

Scalable fit: print the band at 100–105% for adults or 95–98% for kids; horns can be enlarged independently for dramatic looks.​

Finish‑ready surfaces take primer and acrylics well; black PETG band plus PLA horns recommended.​

Technical specsFormat: STL; parts: Left horn, Right horn, Headband; manifold and oriented.​

Print settings: 0.2 mm layer height; Band: 3–4 walls, 10–15% infill in PETG/PLA+; Horns: 2–3 walls, 10–15% infill; no supports.​

Assembly: CA glue or M3 screws through the hidden holes; add foam tape under band for extra comfort.​

Usage notesShow unpainted and finished photos; include sizing in millimeters and a tip to heat‑form the band slightly with warm water if needed. Bundle with bat‑wing headband or vampire fangs for themed costume sets.​