A compact ghost‑shaped keychain charm designed for fast FDM printing with a pre‑modeled loop for standard jump rings and key rings, ideal for seasonal gifts, party favors, and merch packs. The STL is watertight, oriented flat, and sized for single‑color or quick filament swaps in orange, white, black, and red.​

Key featuresClean silhouettes with rounded edges for comfortable pocket carry and reduced stringing on small features.​

No‑support layout at 0.2 mm; two perimeters and 10–15% infill are sufficient; scale from 30–45 mm tall without losing the ring strength.​

Organized file structure and clear naming for instant slicing; includes recommended hardware sizes for the loop.​

Technical specsFormat: STL; manifold and error‑checked; OBJ on request.​

Print settings: 0.2 mm layer height, 0.4 mm nozzle, 2–3 walls, 15% gyroid/line infill; add a 0.2–0.3 mm brim if bed adhesion is weak.​

Materials: PLA or PETG; use higher temp and slower speed for best small‑part detail.​

Usage notesPerfect for Halloween keyrings, zipper pulls, backpack charms, and bundle fillers; package in sets of mixed colors to improve AOV and conversions on marketplaces. Product photos should show scale on a grid or ruler and a close‑up of the loop and surface finish.​​