1/200 Yamato Battleship for static and Radio Control ( RC ) model step file for 3D printing ( Step files help maintain a better surface finish when printing )

Total length: 131cmFull width: 19cmTotal height: 26cm

Due to its large size, the hull of the ship is printed using FDM technology, while the rest is printed using SLA technology for a better surface finish. If you don't have an SLA printer, you can try printing everything using FDM.

I used ABS for hull, but PETG is Ok

Material: PETG, ABSLayer: 0.2Wall: 4Top/Bottom: 5Infill: 15%

Can be painted or coated with epoxy on the outside for 100% waterproof

The ship is powered by four DC motors and one servo controlling the rudder. I planned to make the radar rotate 360 ​​degrees and the gun turrets rotate 180 degrees, but I haven't had time yet. So, if you have some mechanical knowledge, please try to build it.

The data is not colored.

If you like it, please support me by clicking the donate button. or upload a make, follow, like, share !