Spider Tiara

Spider Tiara 3D print model

Description

This drow spiderweb tiara arose from an order for a one time larp character. The character needed an obviously reference to the spider godess Lolth. Because the character was a fighting one the headpiece does not only crown the head, it also has a lot of places to fasten the whole thing to your head with bobby pins. The underlying bars and the wavy hair hoop are specially made for tieing a lot of fake hair and fake dreads onto. The tiara was fdm printed (with a lot of support structure that was hard to remove), spraypainted with black and drybrushed with silver. It sits on the head like a headband behind the ears and covers a large part of the forehead.

The wavy inner bow has a width of 155mm and a height of 100mm. The thin parts of the web have a diameter of ~2mm. Keep that in mind if you have to scale it down a lot and make sure your printer can handle that. I recommend water-soluble filament for the support structure or a resin printer.

As a trained goldsmith with years of experience in 3D design, I work with great care. If something does not fit, please feel free to contact me. And if you are happy with the model then i would be pleased to receive a complimentary comment. I would be very glad to see pictures of the printed model, so feel free to post on instagram (@sarahcadschmid) or email me.

Item rating
0 0
Spider Tiara
$7.00
 
Royalty Free License 
Spider Tiara
$7.00
 
Royalty Free License 
Response 82% in 44.5h
3D Modeling
3D Print Modeling
Hire me

3D Model formats

Format limitations
  • Stereolithography (.stl)99.1 MB
  • OBJ (.obj, .mtl)524 MB
  • STEP (.stp)60.9 MB

3D Model details

  • Publish date2024-05-19
  • Model ID#5292258
  • Ready for 3D Printing
Help
Chat