Keep the fridge, garage, shop, man cave, or break room organized with this modular 3D-printable pop can dispenser.

This download includes the individual components needed to print and assemble the dispenser, with multiple file formats included so you can use the slicer and setup that works best for your printer.

INCLUDED IN THE DOWNLOAD

8 modeled components:

Back 2xBottom Back CenterBottom Front CenterBottom FrontConnecting StarsTop Back CenterTop Front CenterTop Front

Each component is supplied in:

STL – ready for your preferred slicerOBJMTLG-code – pre-sliced files included for convenience

32 files total

INCLUDED G-CODE SETTINGS

The supplied G-code was sliced using approximately:

0.4 mm nozzle0.3 mm layer height3 perimeters100% infill245°C nozzle82°C bed

Important: G-code is printer- and material-specific. Verify all settings before printing. For the safest results, use the included STL files and slice them specifically for your own printer and filament.

DESIGN

This is a multi-piece dispenser designed so the larger assembly can be produced on a standard-size 3D printer rather than requiring the entire dispenser to be printed as one oversized piece.

Some individual components are approximately 150–170 mm in their largest dimensions.

YOU WILL NEEDA 3D printerFilamentSlicer software if using the STL/OBJ filesBasic cleanup/assembly tools as neededDIGITAL PRODUCT

This is a digital download only.

You will not receive a physical pop can dispenser, filament, cans, printer, or other physical products.

Because printers, filament, slicer settings, calibration, and assembly methods vary, print results may vary between users.

LICENSE

Purchase provides a license to download, modify for your own prints, and print this design for personal use.

The original digital files may not be copied, uploaded, shared, distributed, or resold.

Thank you for supporting (Cautiously) Optimistic Dad and helping fund more designs, projects, and builds.