Spotted this waiting room whilst at Bletchley Railway station, Thought it would make a good model for the railway.This design is commonly used under the platform canopy.

This item has been designed at OO gauge, 1/76.2 scale. (Approx size OO when assembled 115mm Long, 50mm Wide, and 43mm High)For HO Gauge print at 87%, 1/87 Scale,For O Gauge UK print at 175%, 1/43.5 scale,For O Gauge International print at 158%, 1/48 scale,For N Gauge UK print at 51.5%, 1/148 Scale, (Caution: I have not test printed this in N gauge scale).

The example in the photos was printed on an AnyCubic Photon with a bed size of 115mm x 65mm x 155mm. The brick Section was printed at 45deg on the X axis, the roof was printed at 40deg on the axis, and 10deg on the axis. The photo is of my first test print so the quality is not 100% perfect but a good example. Windows are not included so you will have to affix some clear plastic or something similar.

I recommend printing these items on a 3D resin printer to get the best resolution print, for larger scales you might be able to print them on a filament printer (Not tested). As normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the design of the model too much.

I use AnyCubic Water Washable Resin for most of my items but use AnyCubic ABS Like Resin for anything that needs to be stronger and tougher.

use this link to join CGTrader and download my designs.

https://www.cgtrader.com/designers/PJD1974?referral_id=3218445